Больше информации по резюме будет доступно после регистрации

Зарегистрироваться
Was online more than two weeks ago

Candidate

Male, 46 years, born on 27 June 1979

India, willing to relocate, prepared for business trips

Commissioning & Completion Lead / Manager

Specializations:
  • Other

Employment: full time, project work, work placement

Work schedule: full day, shift schedule, flexible schedule, remote working, rotation based work

Work experience 23 years 5 months

September 2015currently
9 years 11 months
AMEC FW

Other regions

Lead Commissioning Engineer - ZADCO PMT
• Implements and enforces process safety management policy and procedures in respect of process safety information, hazard analysis, training, subcontractor compliance, plant integrity, work permits, emergency planning and response, incident investigation and compliance audits • Manages and controls PMC Pre-Commissioning, & Commissioning Team activities in order to achieve desired targets • Monitors plant practices to promote high levels of safety, quality insurance and environmental standards in compliance with legislation and plant policy and procedures • Provide oversight into Development of the overall PC&C and start-up logic to ensure a smooth turnover of all of the systems from Mechanical Completion (MC) to Ready for Start-up (RFSU) • Ensures that PC&C personnel participate in P&ID Reviews, HAZOP and Model Reviews identifying Operability, Maintainability and Start-up issues and concerns • Ensures the implementation of the Completions Software, Philosophy and Team are in place to facilitate Project Completion • Determine the work prioritization, and ensure that operability and maintainability aspects of the Complex are addressed at all Phases and areas of the Complex (Utilities, Process) • Closely coordinates departments throughput to achieve required process performance and production target in accordance with the project requirement • Ensures that systems and subsystems necessary to facilitate and expedite timely PC&C Activities are identified and utilized • Attend regularly scheduled Commissioning Status Meetings to ensure all pertinent information is exchanged between all stakeholders • Review and approval of PC&C Procedures, Operations and Maintenance Procedures • Manages and control medium term and day-to-day operations under the guidance of the Project manager and in consultation with other department’s managers • Coordinates and monitors the selection and performance appraisal of manpower • Establishes and maintains effective operating shifts to ensure smooth running and efficient team operation
October 2013November 2015
2 years 2 months
OMV
Commissioning Engineer
* Preparation of pre-commissioning/commissioning procedures and reporting tools (including technical database when applicable, planning, punch list control). * Manage the execution of commissioning to achieve maximum productivity, minimize cost and achieve smooth hand over. * Co-ordinate with other project entities/existing facilities. * To supervise the schedule of commissioning in order to reach the planned end date * To develop a strategy in order to minimize offshore commissioning and minimize lost time due to interfaces. * Review and approve the commissioning management procedures (hand over, interfaces, punch list, internal organization * Review and approve the commissioning dossiers prepared by the Contractor (including database populating and operational test procedures writing). * Coordinate activities of the system engineers, discipline supervisors, planning / punch list controller. * Responsible for the overall safety of commissioning activities * Countersign all pre-commissioning dossiers at Ready For Commissioning (RFC,RFSU) status * To promote HSE behavior within the commissioning activities and verifies that HSE procedures are implemented by commissioning team. * Indicate whether the work can be safely executed under the circumstances that coinciding events take place in vicinity of the work location, which may add risk. Propose segregation in time or place to eliminate the risk identified (``SIMOPS'') * Liaise with the Commissioning Site Leader and the different Systems Engineers and his counterpart in engineering/construction Company team to coordinate his activities and make sure the progress is in line with the Project planning. * Cooperate and support the Operations team in the execution of Start-up activities * Involve the Prepare & complete the Process ICAPS commissioning data base. ;
January 2013May 2013
5 months
JGC
commissioning/Commissioning engineer
* Perform technical tasks assigned by Commissioning Leader; preparation of the pre-commissioning, commissioning and start up activities. * Interface with engineering disciplines, licensors, vendors and subcontractors. * Prepare the commissioning requirements related to HSE or review the same with the HSE department as well as address safety aspects in all procedures and documents regarding commissioning. * Participate Prepare the pre-commissioning, commissioning, start up and test run execution plans with the assistance of the Commissioning Leader. * Raise Permit to Work (PTW) request form and implement the prescribed control measures. * Involving in the review of test run (performance test) procedures and the operating manuals prepared by the Project Process Leader. * Assist Procurement and Subcontracting Department in the definition of subcontractor's scope of work. * Involve Daily meeting for commissioning and operation activities development. ;
May 2012June 2012
2 months
TECHNIP
commissioning/Commissioning engineer
• Attend and participate in all tool box talks. • Ensure all mandatory and planned site inspections have taken place prior to task commencing. • Review risk assessments and method statements for task/work scope. • Report any unsafe act or unsafe conditions in the area in line with the HSE procedure. • Perform activities on commissioning and testing of all construction projects carried out by construction department in accordance with procedures, standards and other guidelines for commissioning work ensure duly start-up. • Ensure ongoing good housekeeping of the work site. Ensure site is left in a clean, tidy and safe manner for hand-over to operations on completion of the work. • Attend initial first issue Permit to Work (PTW) meeting. • Raise Permit to Work (PTW) request form and implement the prescribed control measures
July 2011December 2011
6 months
DOPET
Commissioning engineer
* Assist with preparation of Commissioning Operational Test Procedures (OTPs) as required * Assist with compilation of MC / Pre-commissioning Dossiers by Subsystem. * Assist with preparation of Pre-com & Commissioning execution schedules * Carry out review of all PIDs, Vendor drawings / documentation - comment as necessary. * Provide detailed input into population of MC / Pre-commissioning Database for mechanical & piping disciplines. * Attend FATs where necessary and compile FAT Punch list & FAT Report. * Liaise closely with relevant Subcontractors and Vendors. Attend meetings where required. * Uphold Company's HSE policies at all times. Attend relevant HSE meetings as required. * Visit Warehouse when required, for any package / equipment inspections prior to dispatch to site. * Be responsible for health, safety, security and protection of the environment at the workplace, participate in HSSE trainings according to competency maps, and contribute to integrate HSSE into the company culture * Update the commissioning status with ICAPS OPERCOM, ;
February 2011June 2011
5 months
CHEVRON
Pre Commissioning engineer
GAS CORPRATION - NATIONAL CHEVRON PHILLIPS PROJECT -KSA Designation: Pre Commissioning engineer * Mechanical oversight: flushing / blowing the piping and equipment. Supervise the alignments, mechanical revision and vibration tests. ; * Verify that the pre-commissioning, commissioning and start up requirements are accounted for into engineering documents * Supervise the preparation of the pre-commissioning, and handing over site activities in accordance with the relevant procedures. * Develop database of punch item for commissioning department; update and tacking of it; forwarding of items to Punch List Coordinator for integration in Project Punch System, * Support the Pre Commissioning Superintendent for the aspects falling within his area of responsibility * Ensure the application of the HSE Manual for the activities falling within his sphere of responsibility * Ensure the issue of work progress reports. ; * Raise Permit to Work (PTW) request form and implement the prescribed control measures. ;
January 2010June 2010
6 months
TECHNIP - OAG1
Pre Commissioning & Commissioning engineer
* Supervision and coordination of the Commissioning personnel (including Vendor specialists) during Commissioning * Perform / supervise all commissioning activities (OTP execution, N2 high pressure Leak Test, etc...) * Ensure all Commissioning execution activities are carried out safely and in accordance with the project HSE plan and in line with associated Commissioning JSA * Ensure that Commissioning and start up are carried out in accordance with Basis of Design, Company HSE and quality standards and relevant codes and specifications, and that reliability and operability are given priority * Contributor to HAZOP, and other safety, operations reviews * Contributor the daily commissioning meeting ,Scheduling site commissioning works ( planning , implementation and monitoring) * Assist commissioning support contractors in meeting objectives, to ensure that overall project schedule milestones are achieved * Involve Commissioning activities performed / conducted in SIMOPS * Involve Regular Commissioning PTW Meeting. ; * Development of pre-commissioning & commissioning list for populating of the commissioning IT tracking tool (Win PCS) with engineering data. * Preparing & executing the pre-commissioning activities as per procedures for flushing, blowing, lube oil systems flushing, chemical cleaning/pickling of process lines of compressors, leak test, Inerting, etc. accordingly with client . * Supervised pre-commissioning work forces team in execution and achieving system completion status. * Follow-up with awarded subcontractor (day to day), review of pre-commissioning subcontractor procedures, specific equipment design, as-built documentation and ensure that compliance with the required scope of work and specifications. * Tracking, checking of activities progress; analyzing of delayed activities and finding new solution, with team members and subcontractor personnel, to improve activities progress, * Involved with QA&QC, inspection departments of company and client for inspection, testing and signing off of vessels, motors, pumps, compressors pre-commissioning forms. * Provide routine reporting on pre commissioning activities, including immediate reporting of urgent issues. * Prioritization of works requested by various applicants and instruct proper timing of the works as per pre Commissioning Schedule & Progress on area basis , * Co-ordinate with Operations team to meet their requirements of Plant operability, plant start up, pre-commissioning, commissioning, start up and safe operations. ;
August 2006November 2008
2 years 4 months
JGC
Commissioning & Commissioning Lead supervisor
SOUTH PARS GAS project Phase 6, 7, 8 - IRAN Designation: Utilities Pre Commissioning & Commissioning Lead supervisor * Involved with QA&QC, inspection departments of company and client for inspection, testing and signing off of vessels, motors, pumps, compressors pre-commissioning and commissioning forms; * To supervise and execution of commissioning of piping and mechanical. * To validate the results of the functional and operational tests. * Participate with client organization to obtain final acceptance of ready of start-up from local authorities of systems such as Boiler, Desalination, De-mineralized plant, Nitrogen, Fire fighting, sewer, portable water systems. * Develop database of punch item for commissioning department; update and tacking of it; forwarding of items to Punch List Coordinator for integration in Project Punch System, * Assure technical assistance for commissioning and start-up of units on request of client operation group. * Actively participate to the safety meetings and Participate to the work permits dossiers preparation. * Make sure the execution of the activity is done in line with the work permit and be committed to stop any unsafe acts. * Report any anomaly, unsafe act for further analysis and propose corrective actions ;
May 2005July 2006
1 year 3 months
ALSTOM
Commissioning Lead supervisor
* Overall responsible for commissioning and controlling operational activities of 405 tons, 538 deg C and 2*125 MW CFBC Boiler and auxiliaries. * Formulated plans for sequence checking & implementation for boiler equipments and BMS logic function check. * Interfaced and coordinated with DCS engineer for implementing closed loops and tuning of auto loops. * Well acquainted with ABB Symphony Harmony and ABB Symphony melody DCS System. * Devised effective strategies for commissioning and Operation of AFBC boiler, turbine, generator and other electrical systems, including the unit cold start up, synchronization and full load operation both in desk and local. * Recognized as Signing Authority for Safety permits i.e. hot work, cold work and Vessel entry remits. * Fully accountable for commissioning DCS readiness in conjunction with DCS installation/start-up experts, followed control/instrumentation loops with databases concept. * Led & guided the team in ensuring compliance to all Safety norms to minimize/achieve ZERO accidents through appropriate fire protection system & safety equipments. * Structured annual operational budget and implemented control measures to contain expenses within defined limits. * Reduced the consumable cost of maintenance by emphasis on preventive/predictive maintenance. ;
May 1999April 2005
6 years
AURO ENERGY LTD
Jr engineer
(GROUP OF AROORAN SUGARS) Designation: DCS & Field operation Jr engineer * Responsibility of controlling operation & maintenance cogeneration power plant having 1 no ``IJT'' Boiler of 70TPH at 42 Kg/Sq. * Handled ``SHIN NIPPON'' Turbo Generator of 16.2 MW and its auxiliaries with DCS (Freelance 2000). ; * Drove initiatives for providing steam to sugar plant for sugar process and stem condensate using boiler. * Geared the activities for maintenance of pumps, compressors, material handling equipments, Involving boiler maintenance and auxiliaries * Coordinated successfully with Tamilnadu electrical Board and Power plant synchronize with grid. * Recognized as active member of safety committee. ; * Pioneer in preparing AMC for the machines and maintaining its database. ; * Minimized performance bottlenecks for achieving high productivity with optimization of men, material & machine. ; * Meticulously implemented safety/environment systems/procedures with periodic reviews. ;

Skills

Skill proficiency levels
Project management
MS PowerPoint
Team management
Risk management

About me

detailed design, Responsible for Commissioning, Quality Control, Quality Assurance, Procurement, Operations and Maintenance, Onshore Oil & Gas, Offshore Oil & Gas, Microsoft Word, Microsoft PowerPoint, Microsoft Office, Microsoft Excel

Higher education (bachelor)

2016
Periyar University
MBA, Production
2012
JRVN
Mechanical, Oil and gas Pre commissioning,Commissioning
2002
NPTI
Power plant, Power Plant engineering
1999
State board of technical education
Electrical, Electrical and electronics engg

Languages

TamilNative


EnglishC2 — Proficiency


HindiA1 — Basic


Citizenship, travel time to work

Citizenship: India

Permission to work: Russia

Desired travel time to work: Doesn't matter